5.1

10 Type the translated (public) source IP address in one of the following formats.
Format Example
IP address
192.168.10.1
IP address range
192.168.10.1-192.168.10.10
IP address/subnet
192.168.10.1/24
any
11 Select Enabled to enable the rule.
12 Click Enable logging to log the address translation.
13 Click Add to save the rule.
14 Click Publish Changes.
Add a DNAT Rule
You create a destination (DNAT) rule to map a public IP address to a private internal IP address.
Prerequisites
The original (public) IP address must have been added to the vShield Edge interface on which you want to
add the rule.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges link.
5 Double-click the vShield Edge for which you want to add a rule.
6 Click the NAT tab.
7
Click the Add ( ) icon and select Add DNAT Rule.
8 Select the interface on which to apply the DNAT rule.
9 Type the original (public) IP address in one of the following formats.
Format Example
IP address
192.168.10.1
IP address range
192.168.10.1-192.168.10.10
IP address/subnet
192.168.10.1/24
any
10 Type the protocol.
11 Type the original port or port range.
Format Example
Port number
80
Port range
80-85
any
vShield Administration Guide
76 VMware, Inc.