5.1

12 Type the translated IP address in one of the following formats.
Format Example
IP address
192.168.10.1
IP address range
192.168.10.1-192.168.10.10
IP address/subnet
192.168.10.1/24
any
13 Type the translated port or port range.
Format Example
Port number
80
Port range
80-85
any
14 Select Enabled to enable the rule.
15 Select Enable logging to log the address translation.
16 Click Add to save the rule.
Working with Static Routes
You can set a default gateway and add a static route for your data packets to follow.
Set the Default Gateway
Before you add a static route, you must assign a vShield Edge uplink interface as the default gateway.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
2 Select a datacenter resource from the inventory panel.
3 Click the Network Virtualization tab.
4 Click the Edges link.
5 Double-click a vShield Edge.
6 Click the Configure tab.
7 Click the Static Routing tab.
8 In Default Gateway, click Edit.
9 Select an interface from which the next hop towards the destination network can be reached.
10 Edit the gateway IP if required.
11 Click Save.
Add a Static Route
You can add a static route for your data packets to follow.
Procedure
1 In the vSphere Client, select Inventory > Hosts & Clusters.
Chapter 9 vShield Edge Management
VMware, Inc. 77