User manual MBS-100 Type H Version 2.0.1 www.vocas.
Index: Content MBS-100 matte box support #0350-0010: ............................................. 2 Fit chart: ............................................................................................................... 2 Guide to components: .......................................................................................... 3 Common directions for using this matte box support: ......................................... 4 Contact data:...............................................................
Guide to components: Top view : Alignment card Base plate Camera pin ¼” screw Clamper Clamping block Tubes 170mm. Hex key Vertical alignment adjustment screw © Vocas Systems B.V. Tel: +31(0)35-6233707, e-mail info@vocas.
Common directions for using this matte box support: Please check www.vocas.com for the latest available accessories and fit chart. How to unlock the rails: If the tubes have to be removed, simply flip up the clamper and remove the tube. Attaching this support to the Camera: 1. Attach the Vocas matte box support as shown below. © Vocas Systems B.V. Tel: +31(0)35-6233707, e-mail info@vocas.
How to adjust the clamping mechanism: The clamping mechanism can be readjusted for a tighter or looser grip on the tubes: 1. Flip up the clamper. 2. Remove the 15mm tube. 3. To release the clamp nut, push the clamper downwards, in the direction of the Clamp nut. 4. Rotate the Clamp nut clockwise to tighten, or counter clockwise to loosen the mechanism. © Vocas Systems B.V. Tel: +31(0)35-6233707, e-mail info@vocas.
How to adjust the alignment of the support: For proper alignment of the tubes, the support can be adjusted in the vertical direction. This support is pre adjusted for the JVC GY-HD100, however, sometime it needs some re adjusting for exact alignment. Unscrew the “vertical alignment adjustment screw” for a halve turn, (with the supplied hexagonal key) and move the clamping block to the desired height. To check the proper alignment, the supplied “Alignment card” can be used.
Contact data: Vocas Systems B.V. Larenseweg 121 1221 CL Hilversum-Netherlands T:+31(0)35-6233707 F:+31(0)35-6233997 www.vocas.com © Vocas Systems B.V. Tel: +31(0)35-6233707, e-mail info@vocas.
