User manual MFT to PL adapter Version 2.0.1 V 1.0.1 25-02-2011 www.vocas.
Index: Box contents : ...................................................................................................... 2 Guide to components: .......................................................................................... 3 Common directions for mounting: ........................................................................ 4 Inserting a PL lens: .............................................................................................. 5 Available accessories: .......................
Guide to components: Lens mount clamp ring Winged lock nut PL lock ring MFT mount Lens Cap PL lens cap Rear view 4mm Hex key Height adjustment screws 15mm clamping block 15mm clamper © Vocas Systems B.V.
Common directions for mounting: Turn off the camera before attaching the mount to the camera! Mount the 15mm support on the 15mm rails so the clamp ring is against the camera. Loosen the Height adjustment screws in the 15mm clamping block. Insert the MFT attachment into the MFT opening of the camera through the clamp ring using the red marker on the camera and the lens mount as a position guide. (1) Turn the entire adapter clockwise to lock it into the camera. (2) © Vocas Systems B.V.
Slide the clamp ring over the PL adapter as far as it will go. (1) Fasten the clamp ring by turning the Winged lock nut clockwise. (2) (if the winged nut hits the camera it can be readjusted by pulling on the winged lock nut.) Flip the 15mm clappers of the clamping block in closed position. (3) Fasten the Height adjustment screws of the 15mm clamping block so the height is now fixed in place.
Available accessories: Separate Shim ring set for MFT to PL Adapter #0900-0012 The adapter is pre shimmed to the correct back focus of the Panasonic AGAF100(1) camera, however a separate shim ring set is also available. consisting of: 2 pc. Shim ring PL Thickness: 0,0125mm. 2 pc. Shim ring PL Thickness: 0,025mm. 2 pc. Shim ring PL Thickness: 0,05mm. © Vocas Systems B.V.