Owner`s manual

OWNER’S MANUAL

AV quattro /

9.3 CONTROL PANEL DISPLAY

MENU DOWN UP ENTER

AV bit IN

1 2

4 3

1. AV bit IN STATUS DISPLAY: This is the visual element of the AV bit IN system with a 3-character backlit LCD.

While operating it can display all configuration parameters stored in the amplifier during the installation.

The following pages contain all the messages and statements that may appear on the display from time to

time.

2. MENU: This button activates the AV bit IN and shows the first entry available. Each time you press this button

while normally operating the amplifier, AV bit IN shows the first entry available and not the last entry on which

you worked. At any point, if you press the MENU key you exit from AV bit IN management and automatically

return to the home screen (default display) without saving your changes.

Note: At any point, if you do not touch the keys for 5 seconds, AV bit IN will automatically return to the home screen

(default display) without saving your changes.

3. ENTER: This button is used to:

- Confirm the selected entry,

- Save it,

- Go to the next menu entry.

4. UP - DOWN: These buttons allow navigation through the available entries of various menus.

Depending on the function, you can change the selection and then confirm by pressing the ENTER key.

See 9.5: How to configure AV bit IN