User Manual
Table Of Contents
- Vocera User Guide
- What’s New
- Important Safety Instructions
- Table of Contents
- Welcome to Vocera
- Getting Started
- Features of Your Badge
- Basic Calling
- Logging In and Out
- Recording Names and Greetings
- Calling Other Users
- Calling a Member of a Group
- Broadcasting to a Group
- Training the Genie
- Answering a Call
- Ending a Call
- Using Buttons to Answer “Yes” or “No”
- Call Waiting
- Putting a Caller on Hold and Releasing the Hold
- Using Do Not Disturb
- Sending a Voice Message
- Playing, Saving, and Erasing Voice Messages
- Commands You Can Use During Message Play
- Using the Auto Answer Commands
- Advanced Commands
- Commands for Group Managers
- Maintaining Your Badge
- Voice and Text Email Messages
- The User Console
- Frequently Asked Questions
- Why does the Genie sometimes have trouble understanding me?
- Why is my badge chirping or beeping?
- Why does my badge sometimes beep when I’m talking to someone?
- Why does my badge display say “Searching for Server”?
- Why does my badge beep and then restart?
- None of the buttons on the badge seem to work, and the screen is frozen or blank. How do I get the badge to work again?
- How can I stop the system from logging me out when I put my badge in the charger?
- I heard a busy signal when I pressed the Call button. What happened?
- I can make calls, but I can’t receive calls or messages. What do I do?
- Some of my text messages begin with code such as
- End User Sales Agreement
- End User License Agreement
- Specifications and Regulatory Notices
- Command Reference
- Summon and Dismiss the Genie
- Log In and Log Out
- Record Your Name, Greeting, and Voiceprint
- Call a User or Group Member
- Dial a Telephone Number
- Place a Conference Call
- Initiate a Broadcast
- Forward a Call
- Transfer a Call
- Listen to and Leave Voice Messages
- Block and Accept Calls
- Locate Users and Groups
- Work with your own Groups
- Manage Groups
- Miscellaneous
- Index
Getting Started ··· 15
Getting Started
If this is the first time you are using a Vocera badge, you can get started
right away by following these simple steps:
1. Charge the battery, if necessary.
New batteries must be charged before use. If the badge has already
been used by someone else, check the battery level indicator on the
badge display to make sure the battery has sufficient power.
See Maintaining Your Badge on page 57 for other ways to
determine whether the battery needs charging and for instructions
on how to charge the battery with or without the badge.
2. Choose the lanyard, pocket clip, or universal clip attachment, and
connect it to the badge. Attachments need to be connected prior to
battery installation.
3. Install the battery. To do this, slide the holes in the top of the battery
over the small pegs at the top of the badge’s battery compartment,
and then press down gently to seat the battery.
Lanyard
Pocket Clip Universal Clip
Lanyard
Pocket Clip Universal Clip