User's Manual

Training the Genie
Basic Calling ··· 55
2. When the Genie asks if you want to skip over the commands it has already
learned, do either of the following:
• Say "Yes" to have the Genie automatically skip commands you have
recorded.
The Genie prompts you to record only commands it has not already
learned.
• Say "No" so you can manually skip commands or record all of them
again.
The Genie prompts you to record each command, starting at the
beginning of the list.
3. Use the Call button to skip through the list, recording or re-recording
commands where you wish.
If you skip a command you have already recorded, it is not erased.
4. Quit at any time by pressing the Hold/DND button.
The Genie tells you it is quitting and remembers the commands it has
learned.
A second command trains the Genie to recognize the way you say some of the
less common commands. When you tell the Genie to "Learn more commands",
the Genie prompts you to record additional commands that are not used as
frequently as those in the first set. You can skip through these commands and
re-record them at will as you can with the first set of commands.
The following table lists all the commands you can use to train the Genie:
Table 11. Training the Genie
Action Recommended Voice
Commands
Alternative Forms
Train the Genie to
recognize the way you
say a name
Learn name.
Learn group name.
Learn location name.
Learn a name.
Learn a group name.
Learn a location name.
Delete a learned name Unlearn name.
Unlearn group name.
Unlearn location name.
Unlearn a name.
Unlearn a group name.
Unlearn a location
name.