Vocia® Paging Station Kit 1 (PSKIT-1) Manual December 2013 Biamp Systems, 9300 SW Gemini Drive, Beaverton, Oregon 97008 U.S.A. (503) 641-7287 www.biamp.
IMPORTANT SAFETY INSTRUCTIONS Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this product near water. 6) Clean only with dry cloth. 7) Do not block ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other product (including amplifiers) that produce heat.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 VOCIA PAGING STATION KIT (PSKIT-1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VOCIA PAGING STATION KIT (PSKIT-1) The PSKIT-1 is a standalone Paging Station Kit designed to allow for direct connection to third-party equipment such as fireman’s microphone stations or custom designed fire panels. The PSKIT-1 feature embedded DSP and on-board memory to support standard and advanced public address and mass notification functionalities. The PSKIT-1 can store 999 user-configurable Page Codes.
VOCIA PAGING STATION KIT (PSKIT-1) FRONT PANEL Setup and Use The Vocia software provides an intuitive interface for configuration, DSP equalization and programming of the PSKIT-1. The information supplied by this manual relates to physical connections and assignment. For more details on software setup, please consult the Vocia Help File.
VOCIA PAGING STATION KIT (PSKIT-1) FRONT PANEL PTT Input The Push-to-Talk function will be activated when the PTT pin is connected to Ground. General Purpose Inputs The PSKIT-1 supports 12 unmonitored Control Inputs for connection to a keypad interface numbered 0 through 9, as well as inputs for a Next and Previous scroll button. Each Control Input is activated with a momentary connection to Ground. Only one pin can be selected at once.
VOCIA PAGING STATION KIT (PSKIT-1) FRONT PANEL RS-232 A female RS-232 serial port is provided for Vocia Text Protocol (VTP) connectivity. Please refer to the software help file for all supported commands. Pin Out Function Pin 2 Transmit Data TXD output Pin 3 Receive Data RXD input Pin 5 GND / 0V Aux Port A RJ-45 connector is available internally for use with Biamp accessories. This port is not an Ethernet port and must not be connected to a switch, PoE supply, or other Ethernet network devices.
VOCIA PAGING STATION KIT (PSKIT-1) SPECIFICATIONS Vocia Paging Station Kit Interface 1 SPECIFICATIONS Frequency Response: Effective Input Headroom: Gain: System Headroom: Nominal Input Level: THD + N: General Purpose Inputs: Quantity: Type: TTL Logic Low: TTL Logic High: General Purpose Outputs: Quantity: Max Continuous Current: Max External Supply: A/D Converters: Connection: +0, -1dB, 100Hz to 20kHz 30dB Adjustable in 1dB steps over a 30dB range 18dB -50dBu <0.
WARRANTY BIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPMENT DESCRIBED IN THIS MANUAL 1. BIAMP Systems warrants to the original purchaser of new products that the product will be free from defects in material and workmanship for a period of 5 YEARS from the date of purchase from an authorized BIAMP Systems dealer, subject to the terms and conditions set forth below.
FCC COMPLIANCE FCC NOTICE - CLASS B DIGITAL DEVICE NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential as well as in a commercial installation.
COMPLIANCE DoC PSK201311 EC Declaration of Conformity Biamp Systems Corporation, as manufacturer having sole responsibility, hereby declares that our delivered version of the following described product complies with the applicable provisions of the DIRECTIVES below except as noted herein. Any alterations to the product not agreed upon and directed by Biamp Systems Corporation will invalidate this declaration.
COMPLIANCE RoHS Compliance and Hazardous Substance Table This Biamp product, including all attendant cables and accessories supplied by Biamp, meets all requirements of EU Directives 2011/65/EU. The information below is presented in accordance with parallel requirements of Chinese law SJ/T11363-2006.
