User's Manual

Installing the SRX Mobility Strap
1. Remove the battery from the SRX Wireless Headset.
2. Feed the lanyard end of the mobility strap through one of the eyelets in the headset's battery
compartment. You may find it helpful to push the lanyard through with the tip of a screwdriver. Be
sure to feed the lanyard in the direction shown in the image.
Figure 82: Feeding the Lanyard Through an Eyelet
3. Feed the lanyard back through the other eyelet in the battery compartment.
Figure 83: Feeding the Lanyard Back Through
4. Create a secure loop by inserting the end of the mobility strap with the clip through the lanyard's
loop and pulling it tight.
Figure 84: Inserting the Mobility Strap
5. Clip the other end of the mobility strap to the molded plastic loop on the headset.
Confidential: For informational use by Vocollect Resellers and customers only
Vocollect Wireless Headsets | 119