User's Manual

1. Power off the headset by pressing and holding the Power button on the electronics module for one
second.
2. Grasp the headset by the sides of the electronics module with your thumb and fingers on the black
battery latches.
Figure 93: Battery Latches for Removing SRX2 Battery
3. With your other hand, hold the battery at the end of the electronics module opposite the mic boom.
4. Press and hold both battery latches at the same time, squeezing them into the sides of the electronics
module until the battery releases from the electronics module.
SRX2 Battery Warm-Up Time
If a battery has been used in an extreme hot or extreme cold environment, charging will not start
immediately.
When the battery is placed in the charger, the battery port LED indicator will turn yellow. Charging
will only begin after the battery reaches the proper temperature range - 32° F (0° C) to 104° F (40° C).
It may take up to 30 minutes for the battery to reach a safe temperature.
If battery temperature does not come into range in about one hour, the red LED will blink indicating
that there is a charger fault.
Wearing an SRX2 Wireless Headset
1. Put the headset on and adjust the ear pad to fit snugly over your ear.
Confidential: For informational use by Vocollect Resellers and customers only
Vocollect Wireless Headsets | 129