User's Manual

Figure 78: T-bar Pad Placement on the Head
•
Headset pad options: Vocollect offers a variety of pads to meet the unique requirements of workers
and working conditions.
Standard foam pads: provide cushioning and soft surfaces wherever the headset comes in contact
with the operator. Available on all headsets.
Leatherette ear pads: have a faux leather exterior that is a more firm and supportive and more
moisture resistant than standard foam pads. Offered for all SR-20 through SR-40 models.
Memory foam pads: offer superior cushioning support and comfort. Available in earpads for the
SR-20/21 and in t-bar pads for the SR-20/21 and SR-30.
Removing Headsets
1. Disconnect the headset from the device.
Important: Do not pull on the headset's cord.
2. Unclip the headset cord from your shirt or jacket.
3. Carefully remove the headset from your head.
Note: For the Hard-Hat Headset, remove the hard hat. Press the release clip to remove the
headset unit from the hardhat bracket.
Cleaning Windscreens
Vocollect recommends that you change windscreens every 90 days for optimum speech recognition
performance.
Important: Soap, cleaning solutions, and vigorous washing will remove the protective coating on
the windscreen and decrease its effectiveness.
1. Remove the windscreen from the microphone.
2. Rinse the windscreen under warm water.
3. Squeeze out the excess water and let it air dry thoroughly.
Confidential: For informational use by Vocollect Resellers and customers only
Vocollect Wired Headsets | 111