User's Manual

Cleaning Headsets
Note: Commercial cleaning solvents are not recommended.
• Clean the plastic parts of the headsets with a soft cloth dampened with water. To clean and disinfect
the headset plastic, use a pre-moistened alcohol wipe.
• If the Talkman Connectors or plugs become contaminated, use a pre-moistened alcohol wipe to remove
dirt or residue.
• If the metal connection points on the Talkman's Connectors become discolored, use a soft pencil eraser
to clean them.
• Do not use unapproved liquids to clean the yellow, blue, and red Talkman Connectors (TCOs) and
any associated headset, scanner, or device plugs.
Cleaning the Headband Pad
Note: Vocollect strongly recommends that you leave the headband pad in place when cleaning it.
If you must remove the entire pad to clean it, use care to line up the headband pad with the topmost
part of the headband when you place it back on the headband.
• Leave the headband in place and simply wipe the headband with a soft cloth. If necessary, use a
pre-moistened alcohol wipe to clean and disinfect the unit.
Cleaning the Dual-Cupped Headset Ear Pad Cover
• The cupped headset ear pad cover is made of 100% cotton flannel and may shrink if washed and dried
in a dryer. Vocollect recommends that the covers be hand or machine washed in cold or warm water
and then air dried.
Confidential: For informational use by Vocollect Resellers and customers only
112 | Vocollect Hardware Documentation