User's Manual

ToneLED PatternHeadset ModeUser ActionHeadset
Function
No tone when
entering mode.
Constant quick
flash: four flashes
Headset disconnects current
pairing and enters low power
pairing mode
Headset attempts to pair
with the nearest un-paired
Hold the Plus
(+) and Minus
(-) buttons for
four seconds
Force disconnect
for manual
pairing in low
power mode
Three ascending
tones upon
pairing with a
device
per second (50 ms
on, 200 ms off)
Bluetooth device. Previous
pairing erased from
headset's memory.
No tone when
entering mode.
Constant flash in
which LED stays lit
Headset enters high power
pairing mode
Headset attempts to pair
with the nearest un-paired
With headset
in pairing
mode, hold the
Plus (+) and
Minus (-)
Switch to high
power pairing
when pairing in
low power mode
has failed
Three ascending
tones upon
pairing with a
device
longer: about two
flashes per second
(350 ms on, 50 ms
off)
Bluetooth device. Previous
pairing erased from
headset's memory.
buttons for
seven seconds
Note: This mode is
recommended when
pairing an SRX headset
with a handheld device
Note: Vocollect does not
recommend this pairing
mode for Talkman
devices. This mode
greatly increases the
likelihood that your
headset will pair with
the wrong device.
Three descending
tones when the
Repeating pattern
of three quick
The headset cannot find an
un-paired Bluetooth device
within range.
N/ALost connection:
• A
previously-paired
connection to the
master device is
dropped
flashes, then off for
about a second.
Headset remains in this
mode for 10 minutes while it
device is not
detected by
the headset
at power on
waits for a previously-paired
device to come within range.
• A paired
device is
powered off
After 10 minutes of no
activity, the headset powers
off.
• Low Power or
High Power
Pairing
modes fail to
pair with a
device within
60 seconds
Confidential: For informational use by Vocollect Resellers and customers only
120 | Vocollect Hardware Documentation