User's Manual

Figure 93: Wearing the SRX2 headset
2. Position the t-bar directly above, and as closely as possible to, your other ear.
3. If installed, adjust the stability strap so it fits securely across the back of your head.
4. Rotate the electronics module up or down to position the microphone near your mouth.
Figure 94: Moving the Microphone Into Position
5. Make final adjustments with the flexible boom so that the microphone is positioned at the corner of
your mouth, about 1 inch (2.5 cm) away from your face.
Installing the Stability Strap on the SRX2 Wireless Headset
1. Hold the headset so that the earpad faces you and the electronics module faces away.
2. Locate the knob on the inside of the headband near the earpad.
3. Hold the strap so that the end with the hole fits over the knob on the headband, and press down
firmly so the knob comes all the way up through the hole.
Confidential: For informational use by Vocollect Resellers and customers only
128 | Vocollect Hardware Documentation