User's Manual

ToneLED PatternHeadset ModeUser ActionHeadset
Function
connected, device
says, "louder."
Two tone descending
sequence. If
N/AN/APress the Minus
(-) button
Decrease volume
connected, device
says, "softer."
No tone when
entering mode. Three
Solid greenHeadset disconnects
current pairing and
With headset
connected, press
Force disconnect
for manual
ascending tones upon
pairing with a device
enters low power
pairing mode
the Plus (+) and
Minus (-) buttons
pairing in low
power mode
No tone when
entering mode. Three
Rapid flash, then
solid green
Headset enters high
power pairing mode
With headset in
pairing mode,
press the Plus (+)
Switch to high
power pairing
when pairing in ascending tones upon
pairing with a device
Note: This mode is
recommended only
and Minus (-)
buttons
low power mode
has failed
if low power pairing
fails.
Note: Vocollect
does not
recommend this
pairing mode for
Talkman devices.
This mode greatly
increases the
likelihood that your
headset will pair
with the wrong
device.
Three ascending
tones upon
Slow flashing
blue (on 25%, off
75%)
Headset connected as a
slave device
N/ANormal
operation, paired
and connected connecting to master
device
Three descending
tones when the
Slow flashing
green (on 25%,
off 75%)
Headset connectable but
not discoverable.
Any Bluetooth device
can connect if it knows
the headset's address.
N/APaired but
connection
dropped, possibly
out of range
connection to the
master device is
dropped
N/ASolid blue when
plugged in, off
Device updateConnect headset
to computer
Update headset
software
during update,running Vocollect
returns to solidHeadset Software
Update Tool blue when
update complete
Confidential: For informational use by Vocollect Resellers and customers only
Vocollect Wireless Headsets | 131