User's Manual

Bluetooth addresses displayed on a screen, and eliminates the problem of unwanted cross pairing. Auto
and manual pairing processes are not available in screen-based pairing.
Prerequisites:
• The headset is powered off.
• The handheld device is not in a charger, and there is no wired headset connected to it.
• The device is in sleep mode — not in use running an application.
• The device is Bluetooth ready with Bluetooth connection features enabled.
1. Turn on the SRX2 headset. The SRX2 headset starts up in low power pairing mode.
Note: Some handheld devices may require the headset to be in high power pairing mode in order
to be discovered in the device's pairing inquiry. To change to high power pairing mode, press and
release the Plus (+) and Minus (-) buttons on the headset while it is in low power pairing mode.
2. Initiate the pairing inquiry from the master device by pressing or clicking the appropriate button on
the screen.
3. Hold the headset and wireless device so they are within six inches of each other but not touching.
4.
Select the ID number of the headset you want to use from the Select SRX Headset list on the screen.
5. Tap or click the appropriate button on the screen to create the pairing.
The device briefly displays that the device attempts to connect to the headset . Once the headset
connects, three tones play in the headset, the SRX Headset Status displays as Connected. The pairing
confirmation step is skipped because the pairing was specified by the user.
6. Press the Play/Pause button to begin working.
Handheld Device Pairing Status Icons
When using the Vocollect Voice application on a handheld wireless device, an icon in the upper right
hand corner of the screen indicates the pairing status. Vocollect Voice on a PC displays similar
browser-based notifications, but the icons are different.
StatusIcon
A wireless headset is not paired to the device
The device is searching for a headset
The device is paired with a headset but not yet connected
The device is connected to the headset
Pairing a Headset by VoiceConsole Pairing
The VoiceConsole pairing method should only be used if the device/headset pairing will be performed
once and never changed. While manual pairing can also result in this permanent pairing, VoiceConsole
eliminates the device inquiry step and begins paging immediately for the Bluetooth address.
Prerequisites:
• The headset is powered off.
• The device is not in a charger, and there is no wired headset connected to it.
• The device is in sleep mode — not in use running an application.
• The device is Bluetooth ready with Bluetooth connection features enabled.
Confidential: For informational use by Vocollect Resellers and customers only
Vocollect Wireless Headsets | 137