User's Manual

Configuration Parameters for SRX/SRX2 Headsets
Values & Setting
Location
DescriptionSupported
Devices
Parameter
True
False (default)
Determines whether or not the
Bluetooth portion of the radio
A500,
T5-Series
Bluetooth_IsEnabled
is receiving power. When the
Set in VoiceConsole > Device
Profile or Edit Device
value for this setting is set to
false, the Bluetooth portion of
the radio receives no power,
and no other Bluetooth
parameters are active.
0 = disabled
1 = enabled
Enables automatic pairing
mode on SRX and SRX2
headsets.
This parameter is not
applicable for third-party
handheld devices.
A500,
T5-Series
SrxAutoPairEnable
The default setting depends
on the version of Vocollect
Voice software implemented.
If this parameter is set to 1
(enabled), the setting of
SrxClearPairingInCharger
is ignored
Set in task package,
operator profile, device
profile, or VRG file
0 = disabled
1 = enabled
Gives the user the ability to
force devices to clear the
A500,
T5-Series,
Psion,
Intermec
SrxClearPairingInCharger
If you enable this
parameter, the
headset Bluetooth pairing
from memory when placed into
a charger.
SrxAutoPairEnable must be
set to 0 (disabled).
Note: In VoiceCatalyst
with
Set in VoiceConsole > Device
Profile
SrxClearPairingInCharger
not set, the pairing is
cleared if
SrxAutoPairEnable is set
to 1. If
SrxClearPairingInCharger
is set to 0, it will prevent
the pairing from being
cleared when the device is
placed in a charger.
0 = disabled
1 = enabled (default)
Enables/disables use of SRX
or SRX2 wireless headsets
A500,
T5-Series
SrxHeadsetEnable
with approved Bluetooth
devices.
Set in VoiceConsole > Device
Profile
Confidential: For informational use by Vocollect Resellers and customers only
Vocollect Wireless Headsets | 141