User's Manual

3. Squeeze out the excess water and let it air dry thoroughly.

Cleaning Headsets

Note: Commercial cleaning solvents are not recommended.

• Clean the plastic parts of the headsets with a soft cloth dampened with water. To clean and disinfect

the headset plastic, use a pre-moistened alcohol wipe.

• If the Talkman Connectors or plugs become contaminated, use a pre-moistened alcohol wipe to remove

dirt or residue.

• If the metal connection points on the Talkman's Connectors become discolored, use a soft pencil eraser

to clean them.

• Do not use unapproved liquids to clean the yellow, blue, and red Talkman Connectors (TCOs) and

any associated headset, scanner, or device plugs.

Cleaning the Headband Pad

Note: Vocollect strongly recommends that you leave the headband pad in place when cleaning it.

If you must remove the entire pad to clean it, use care to line up the headband pad with the topmost

part of the headband when you place it back on the headband.

• Leave the headband in place and simply wipe the headband with a soft cloth. If necessary, use a

pre-moistened alcohol wipe to clean and disinfect the unit.

Confidential: For informational use by Vocollect Resellers and customers only

Vocollect Wireless Headsets | 145