User's Manual

• The T2 series battery charger includes five battery slots. The charger can be used to store and charge
up to five batteries at a time.
• Wall mounts are available that can accommodate a single charger, multiple chargers, and battery
chargers.
T2 Series Battery Charger Specifications
Approximately 24" (61 cm)Length
Approximately 24" (61 cm)Length with Desk Mount Feet
Approximately 2.5" (6.5 cm)Width
Approximately 5" (12.7 cm)Width with Desk Mount Feet
Approximately 5.25" (13.3 cm)Height
Approximately 5.375" (13.65 cm)Height with Desk Mount Feet
90-264 Vac 50/60 Hz 72 W
Uses standard IEC 630 cord
Power
50° to 140° F (10° to 40° C)Operating Temperature
-22° to 158° F (-30° to 70° C)Storage Temperature
Functional to 90% non-condensingHumidity
Assembling the Stands for the T2 Charger
You will need a #2 Phillips screwdriver
Parts list:
• Charger stand(s)
• 2 rubber feet per stand
• 4 Phillips screws per stand
1. Secure the rubber feet to the stand with the screws.
2. Position each stand so that its top lip is inserted into the center channel in the back of the charger.
Figure 105: Positioning the stand on the charger
Figure 104: Attaching the feet
3. Secure each stand to the charger by inserting screws through the holes in the stand and screwing
them into the slot on the bottom of the charger.
Confidential: For informational use by Vocollect Resellers and customers only
Chargers | 153