User's Manual

If a device with a battery is the charger...Right Indicator ColorLeft Indicator Color
The battery may not be inserted into the charger
correctly.
If the LED continues to blink red after inserting
the battery into the charger correctly, troubleshoot
the charger.
OffBlinking Red
The battery is defective. Remove the battery from
the charger and give it to your system
administrator.
Blinking Green, then OffBlinking Red, then Off
Troubleshoot the problemOffBlinking Yellow
This will occur briefly when a battery is removed
from the charger. If the LEDs stay on for a length
of time, troubleshoot the problem.
GreenYellow
The battery may not be properly inserted into the
charger.
OffYellow
The battery may be too hot or too cold. Wait for the
battery's temperature to normalize.
If the yellow LED remains lit for more than two
hours, troubleshoot the problem.
T1 10-Bay Combination Charger
Figure 112: T1 10-Bay Combination Charger
• The T1 10-Bay Combination Charger can store five devices at a time.
• The charger can store and charge ten batteries at a time - five batteries in the lower battery slots
and five batteries connected to devices in the upper device slots.
• A T1 device should not be placed into a device charger without a battery attached to it.
• The socket-outlet should be installed near the equipment and should be easily accessible.
T1 10-Bay Combination Charger Specifications
21.9" (55.6 cm)Length
3.7" (9.4 cm)Depth
5.9" (15 cm)Height
Input Voltage: 12 V DC
Input Current: 5 A maximum
Power
Confidential: For informational use by Vocollect Resellers and customers only
Chargers | 159