User's Manual

• Bluetooth
™
wireless technology is used to connect the Honeywell LXE 8652 to a device. During use,
it is possible for the scanner to disconnect from the device if the communication link is disrupted.
When the scanner is setup so that the device initiates the connection, the device typically recovers
the connection automatically. When the scanner initiates the connection, it typically requires the
press of a button to activate and recover the connection.
• The large black unit contains the Bluetooth
™
radio and battery. The battery must be removed for
charging.
• For detailed features and specifications of the Honeywell LXE 8652 ring scanner, please refer to the
manufacturer's website.
Honeywell LXE 8652 Bluetooth Ring Scanner Parts
Vocollect Part NumberRing Scanner Part
BC-613-1Barcode Scanner, Bluetooth Ring (Honeywell LXE 8652) Kit (scanner
with Bluetooth module, battery, and two wrist straps - large and small)
BC-613-101Replacement scanner without Bluetooth module (Honeywell LXE 8652)
BC-613-102Replacement battery, Bluetooth Ring Scanner (Honeywell LXE 8652)
BC-613-103Replacement large hand wrist strap, barcode scanner, Bluetooth Ring
(Honeywell LXE 8652)
BC-613-104Replacement small hand wrist strap, barcode scanner, Bluetooth Ring
(Honeywell LXE 8652)
BC-613-105Replacement 8-bay battery charger (Honeywell LXE 8652)
BC-613-106Replacement single battery charger (Honeywell LXE 8652)
BC-613-107Replacement finger strap (20 pack), barcode scanner, Bluetooth Ring
(Honeywell LXE 8652)
BC-613-108Replacement finger strap assembly (20 pack), barcode scanner,
Bluetooth Ring (Honeywell LXE 8652)
BC-613-109US power cord cable
BC-613-110Euro power cord cable
BC-613-111British power cord cable
Setting up the Honeywell LXE 8652 Scanner
The Honeywell LXE 8652 scanner only acknowledges the first “reset” barcode with an audible tone.
Subsequence barcodes used for setup are silently acknowledged as successful when the scan beam
extinguishes.
The scanner should be approximately 1 foot from the page with the centered red cross almost filling the
barcode for the setup scans to be successful.
1. Print this page.
2. Scan the following code to ensure that the scanner's parameters are set to the default settings.
Confidential: For informational use by Vocollect Resellers and customers only
Bar Code Readers and Printers | 177