User's Manual

0
8. Scan the following bar code to send data then scan suffix 1 followed by scan suffix 2.
Figure 128: Send Data/Scan Suffix 1 and 2
9. Scan the following bar code to disable the suspend timer condition.
Figure 129: Disable Suspend Timer
Pairing the Honeywell LXE 8652 Scanner: Talkman Device Is the Initiator
During use, it is possible for the scanner to disconnect from the device if the communication link is
disrupted. When the scanner is setup so that the device initiates the connection, the device typically
recovers the connection automatically. When the scanner initiates the connection, it typically requires
the press of a button to activate and recover the connection..
This method of pairing is useful if a single Talkman T5 Series device will always be associated with one
scanner.
You must have access to VoiceConsole to set up the pairing. For production use, Vocollect recommends
that you create a specific device profile in VoiceConsole to store many of the following settings.
1. Print this page.
2. Scan the following barcode to ensure that the Honeywell LXE
®
8652 scanner is ready to accept a
connection, even if it was previously paired.
Caution: The scanner may not accept a connection if this barcode is not scanned.
Confidential: For informational use by Vocollect Resellers and customers only
180 | Vocollect Hardware Documentation