User's Manual

Configuring an Intermec Device for Bar Code Reader Input to Vocollect Voice
How to configure an Intermec handheld device so that Vocollect Voice can accept input from an external
bar code reader.
These steps must be performed after pairing an Intermec device to a bar code reader.
1. On the Intermec device, tap Start > Settings.
2.
On the System tab of the Settings screen, tap Intermec Settings.
3.
On the Intermec Settings screen, tap Data Collection.
The scanner's name will appear on the Data Collection screen.
4. Select the scanner.
A list of available settings will appear.
5.
Select Scanner Settings.
6.
Activate the Hardware Trigger check box.
7.
Tap OK.
Vocollect Voice will now allow input from the external scanner you are using.
Accessories
Vocollect offers a variety of accessories for wearing, protecting, and facilitating the operations of Talkman
and other handheld devices.
Inline Adapter Cables: Talkman Devices and Handheld Devices
Most inline adapter cables are made for a specific handheld device, so be sure to use the correct adapter
for your device.
A device-specific inline adapter training cable, also referred to as a "Y" or splitter cable, must be used
with third-party handheld devices in order to connect both a Vocollect headset and listening system to
the device.
Inline adapter training cables must only be used with listening systems approved by Vocollect.
Figure 157: Training Cable (TR-603-102) for Talkman, Wired
Scanner, and Listening Kit
Figure 156: Training Cable (AD-300-1) for Handheld Device,
Headset and Listening Kit
Confidential: For informational use by Vocollect Resellers and customers only
202 | Vocollect Hardware Documentation