User's Manual

Figure 163: CE Application Manager Window

Check both the Vocollect configvrg and Vocollect Voice checkboxes. Be sure the Install program

into the default installation folder checkbox is checked.

Click OK.

Repeat these steps for each device onto which you want to install Vocollect Voice.

Installing Vocollect Voice 1.3 and Later Using Other Synchronization Software

Note: This process is required only for initial configuration. Modifications to the device profile can

be downloaded using VoiceConsole when a device is connected to the VoiceConsole application.

1. Create an appropriately named folder, either on your desktop or in a location that is easy to access.

2. Place the Vocollect Voice DVD into your DVD drive and open its folder.

3. Select all files (executables, .cab, .ddf, and .vrg files) and copy them to the folder you created.

4. Open the folder that you created, that contains the .cab file and executables.

5. Use the synchronization tool to place the .cab file onto the handheld device and extract it.

6. Place the config.vrg into the appropriate folder:

DirectoryDevice

\Flash Disk\Psion devices running Windows CE

\Storage\Psion devices running Windows Mobile (VVH 1.3 and

earlier)

\System\VocollectVoice\Honeywell LXE

Confidential: For informational use by Vocollect Resellers and customers only

210 | Vocollect Hardware Documentation