User's Manual

Using the Samson Wireless Listening System
For best performance, attach listening devices to the red port of your Talkman device. If the red port is
unavailable, or if you are using a handheld device, an inline adapter training cable, or "Y" cable, attached
to the yellow port may be used. When using the "Y" cable, be sure to connect both a Vocollect headset
and the listening system transmitter because the headset's performance is influenced by gain and
headphones level adjustments.
You need the following items:
• Samson listening kits (TR-605-x) with both radios configured to the same channel setting. Each
listening system contains the following items:
• Receiver
• Transmitter
• Plastic screwdriver
• Headphones with 3.5 mm jack
• Batteries (2 9V for TR-605-x)
• Vocollect audio adapter cable
• If you are using a Talkman A500/T5 with a wired barcode reader, you will need the TR-603-102 "Y"
adapter cable which connects a scanner and a listening kit transmitter via the red port on the A500/T5
device.
• If you are using a handheld device, you will need the AD-300-1 inline "Y" adapter training cable which
provides a connection for a wired Vocollect headset and an audio output connection to go to the
listening kit transmitter.
• Talkman device or handheld device
• Vocollect SR-Series headset
Setting up the Transmitting Radio
Figure 167: Transmitting Radio TR-605-x
The transmitting radio is set up as a dedicated transmitter and is connected to the operator's Talkman
device or handheld device.
1. Insert a battery into the transmitting radio. (TR-605-x transmitters are labeled UHF BELTPACK
TRANSMITTER on the bottom front)
2. Connect the Vocollect audio adapter cable to the matching port on the operator's Talkman device or
handheld device.
• If you are using a Talkman device, make sure to connect the audio adapter cable to the red port
on the Talkman device.
Confidential: For informational use by Vocollect Resellers and customers only
Listening Kits | 223