User's Manual

• If the audio sounds distorted, readjust the Phones Level control on the gray receiving radio by
rotating the control screw slightly counterclockwise while pressing the Plus button on your device.
• If the volume is too low, even with the headphones set to their maximum level, adjust the gain on
the black transmitting radio by rotating the Gain control screw slightly clockwise while pressing
the Plus button on your device.
If you are using an inline adapter training cable connected to a handheld device, it is likely you will
have to readjust the gain.
9. Once the wireless listening system settings have been adjusted to maximum volume without distortion,
use the volume control on the headphones, powered speaker, or the Plus and Minus buttons to lower
the device's volume.
Sony Wireless Listening Systems (UTX-B2 and URX-P2)
Figure 169: Sony
®
UTX-B2 and URX-P2
• The wireless listening system allows trainers, administrators, or other operators to remotely listen
to the conversation between an operator and a Talkman wearable computer or handheld device.
• The wireless listening system consists of a transmitting radio and a receiving radio which communicate
with each other over a particular radio channel. This system can be used to monitor several operators
by setting each transmitting radio to a different channel and then changing the channel on the
receiving radio to that of the transmitter you wish to monitor.
Important: Ensure that you do the following before using the listening system:
•
Set the transmitter's Line/Mic switch to Line
•
Plug the monitoring headphones into the Monitor port on the receiver
• Turn down the headset's volume before putting it on
Setting up the Receiving Radio
Note: The receiver is labeled UHF Synthesized Diversity Tuner.
Confidential: For informational use by Vocollect Resellers and customers only
Listening Kits | 225