User's Manual

Numbered Messages display in VoiceConsole as the numeric value of the error, followed by the text
message that displays in Debug. If you have seen a numbered error message in VoiceConsole, see the
Numbered Error Messages topic.
Spoken Messages are heard through a headset. If you have heard an error message through a headset,
see the Spoken Error Messages topic.
Note: Not all numbered error messages displayed in VoiceConsole have a corresponding spoken
message.
Numbered Error Messages
SolutionTextNumber
Event detect initialization failed.0x020a
1. Turn the device off and then turn it back on
again.
Event control failed to create
shared data module.
0x0203
2. Reboot the device.
3. Reload VoiceClient.
Event control failed to create
shared data module.
0x0203
Change the battery.Battery is getting low.0x0206
Battery is getting low. Change
battery now.
0x0207
Battery is very low. Powering off.
Must replace battery after power
off complete.
0x0208
—Noise sampling procedure failed.0x0602
—Noise sampling procedure timed
out.
0x0603
—Invalid operator file name.0x0605
Train returned bad status to
UpdTrain.
0x060c
1. Turn the device off and then turn it back on
again.
2. Reboot the device.
3. Reload VoiceClient.
—Unable to train words. Not enough
free flash memory.
0x060e
Speak failed to initialize properly.0x0802
1. Check the crashdump file. For more information,
see the VoiceConsole online help.Speech-out failed. Audio system
failure.
0x0804
2. Turn the device off and then turn it back on
again.
Dialog power-off failed.0x1201
3. Reboot the device.
4. Reload VoiceClient.
—Task not loaded. No task name
available.
0x1202
—OperLoad failed -- TmplSend busy.0x1203
Confidential: For informational use by Vocollect Resellers and customers only
238 | Vocollect Hardware Documentation