User's Manual

SolutionError Message
"Failed to load task VCF file. Task load
failed."
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reload the task.
4. Reboot the device.
5. Reload VoiceClient.
"Failed to load device emulation config
file. Task load failed."
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reload the task.
4. Reboot the device.
5. Reload VoiceClient.
"Failed to write the ODR NTI
registration file. Task load failed."
1. Reload the task.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
"Firmware error while changing task.
Task not changed."
1. Reload the task.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
"Flash error."
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
"Flash is full. Please wait while Talkman
turns off."
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
Change the battery."Headset battery is getting low."
Change the battery."Headset battery is getting low. Change
headset battery now."
"Initializing operator failed. Please
reload operator."
1. Reload the operator.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
"Internal error loading operator."
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
Select the operator again or load a different operator."Invalid operator file name."
Confidential: For informational use by Vocollect Resellers and customers only
244 | Vocollect Hardware Documentation