User's Manual

SolutionError Message
4. Reload VoiceClient.
"Telnet client process failed to start."
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
"Telnet session manager failed to start."
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
"Telnet VT220 emulation process failed
to start."
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
"Unable to receive input data."
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
"Unable to retrieve operator files."
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
"Unable to send output data."
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
"Unable to train words. Not enough free
flash memory."
1. Wait for the device to go to sleep.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
"Warning, low flash memory!"
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
5. Place the device in a charger as soon as possible.
"Warning, low flash memory! You must
upload your collected data now!"
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
5. Place the device in a charger as soon as possible.
Confidential: For informational use by Vocollect Resellers and customers only
246 | Vocollect Hardware Documentation