User's Manual

The LED indicator turns red for a few moments then turns green. The training device displays, "Please
keep quiet for a few seconds."
Note:
• If your device does not say this, press the Operator button to manually perform a background
noise sample.
• If you cannot see words displayed on the training device screen, there may be a problem with
the contrast on the device. Refer to the manufacturer's documentation.
• The Talkman device says and the training device displays, "Please say zero."
4. Say "Zero."
The Talkman device says and the training device displays, "One."
5. Say "One."
The Talkman device says and the training device displays, "Two."
6. Say "Two."
The Talkman device says, "Please say the following words as they appear on the screen."
The Talkman device stops speaking and words to train are only displayed on the screen. Speak the words
as they appear on the device display. Words appear in random order and are repeated at least four times
to get an accurate recording of how you speak the words. If it prompts you for phrases, say the phrase
naturally, without exaggerated pauses between the words.
When the device has asked for all words in the task the necessary number of times, the device will say,
"Creating voice templates. Please wait." It will then beep periodically until all of the remaining voice
templates have been created.
During the beeping, the device periodically repeats the "... Please wait" phrase to alert the user that it
is still busy. When the remaining voice templates have been created, the device says, "Finished creating
voice templates." The device then goes to sleep. You can begin the task by pressing the Play/Pause button.
You can expect the device to beep for approximately two minutes after all of the vocabulary words have
been spoken. If the operator presses any of the device's buttons during this time period, the device says,
"Creating voice templates. Please wait."
Disconnect the training device and begin your task by pressing the Play/Pause button.
Training through VoiceConsole's Display
Note: Supported when using VoiceConsole 3.0 or newer and VoiceClient 3.5 and newer.
If you are using VoiceConsole 3.0 or newer and VoiceClient 3.5 or newer, you can view the words the
device asks you to train on a computer screen, through the user interface, or pocket PC device screen as
you go through the training process. See Viewing Dialog Between and Device and an Operator in the
VoiceConsole online help for more information.
Training Using a Printed List of Words
Note: Supported when using VoiceConsole 3.1 or newer.
Note: This is the recommended training method for the Talkman T1.
Confidential: For informational use by Vocollect Resellers and customers only
262 | Vocollect Hardware Documentation