User's Manual

• In VoiceConsole, find the device and use the appropriate action link to pair it to a peripheral.

• See VoiceConsole Help for detailed instructions on pairing devices.

• Create the pairing with the Zebra

™

Series printer.

Pairing with Intermec PB50 Printers

Please refer to Intermec documentation on configuring the PB50 for Vocollect applications.

For Bluetooth pairing:

• In VoiceConsole, find the device and use the appropriate action link to pair it to a peripheral.

• See VoiceConsole Help for detailed instructions on pairing devices.

• Create the pairing with the Intermec

PB50 mobile printer.

For Wireless Network (WiFi) pairing:

• In VoiceConsole, find the device and use the appropriate action link to pair it to a peripheral.

• Enter the printer's Pairing Name, Host, and Port.

The default TCP/IP port for the PB50 printer is 9100.

• See VoiceConsole Help for detailed instructions on pairing devices.

Pairing the Honeywell LXE 8652 Scanner: Talkman Device Is the Initiator

During use, it is possible for the scanner to disconnect from the device if the communication link is

disrupted. When the scanner is setup so that the device initiates the connection, the device typically

recovers the connection automatically. When the scanner initiates the connection, it typically requires

the press of a button to activate and recover the connection..

This method of pairing is useful if a single Talkman T5 Series device will always be associated with one

scanner.

You must have access to VoiceConsole to set up the pairing. For production use, Vocollect recommends

that you create a specific device profile in VoiceConsole to store many of the following settings.

1. Print this page.

2. Scan the following barcode to ensure that the Honeywell LXE

8652 scanner is ready to accept a

connection, even if it was previously paired.

Caution: The scanner may not accept a connection if this barcode is not scanned.

Figure 7: Set Up Scanner as Slave

3. Using VoiceConsole, locate the specific Talkman T5 device to be paired with the scanner.

View the properties of the device, and ensure that Bluetooth is enabled. If it is not enabled, click Edit

this device and set Bluetooth Enabled to "enabled."

Select the Pair this device with a peripheral option.

For Pairing Type select "Bluetooth Scanner."

For Connection Mode select "Device initaties connection with peripheral."

Confidential: For informational use by Vocollect Resellers and customers only

42 | Vocollect Hardware Documentation