User's Manual

Figure 14: Power Supply
Figure 13: Battery Adapter
Note: You may provide your own power supply, but it must supply 12-15V at 1 Amp and must be
limited to less than 250VA (Watts). If you chose to provide your own, you are still required to purchase
the battery adapter cable and battery adapter for final connection to the A500 or T5-Series device.
Note: This configuration does not require you to connect the A500 or T5-Series device to the vehicle's
power source. If desired, for operational reasons, T5-Series devices may be used in VMT configuration
using a Vocollect battery.
Talkman A500/T5 VMT Mobile Computer Accessory Specifications
-30° to 50° C (-22° to 122° F)Operating Temperature
-40° to 70° C (-40° to 158° F)Storage Temperature
Mounts for Talkman A500/T5 VMT Mobile Computers
The Screw On Mount is a mounting option that is bolted to a stationary surface on a vehicle.
The Clamp Mount is a mounting option that is clamped to a stationary surface on a vehicle. This can
also be bolted to a stationary surface, if desired.
Figure 16: Clamp MountFigure 15: Screw On Mount
Confidential: For informational use by Vocollect Resellers and customers only
46 | Vocollect Hardware Documentation