User's Manual

Figure 24: Connected to a Voice Device
Screens relevant to the application loaded onto the voice device will appear once the voice application
is running.
T5/A500 Adjustable Shoulder Harness
Operators wear devices on an adjustable shoulder harness that is purchased from Vocollect. The device
is attached to the shoulder harness with a specially designed clip.
Operators must regard the clip and the device as two separate entities. The clip should be attached to
the Vocollect shoulder harness at the beginning of a shift. Then, the operator can attach the device to
and remove the device from the clip as often as necessary throughout the shift.
T5/A500 Adjustable Shoulder Harness Specifications
2" (5 cm) Wide Adjustable NylonShoulder Strap
Two Adjustable Elastic Nylon, 32"-48"(81 cm - 122 cm)Chest Straps (Regular)
Two Adjustable Elastic Nylon, 41"-66" (104 cm - 167 cm)Chest Straps (Large)
Putting a Device on a T5/A500 Shoulder Harness
To mount a device onto the specially designed belt or shoulder harness, an operator must have a slim
belt clip (provided with the belt or harness). The clip should be attached to the belt at the beginning of
a shift. Then, the operator can attach the device to and remove the device from the clip as often as
necessary.
Note: Vocollect strongly recommends that the device be worn on the right side of the body with the
device's buttons on the top and its connectors toward your back.
Figure 25: T5/A500 Shoulder Harness Properly Worn - Front and Back Views
Confidential: For informational use by Vocollect Resellers and customers only
54 | Vocollect Hardware Documentation