User's Manual

Figure 41: Screw On MountingFigure 40: Screw On Mounting Parts
Figure 43: Clamp MountingFigure 42: Clamp Mounting Parts
Figure 45: Power Supply
Figure 44: Battery Adapter
Note: You may provide your own power supply, but it must supply 12-15V at 1 Amp and must be
limited to less than 250VA (Watts). If you chose to provide your own, you are still required to purchase
the battery adapter cable and battery adapter for final connection to the A500 or T5-Series device.
Note: This configuration does not require you to connect the A500 or T5-Series device to the vehicle's
power source. If desired, for operational reasons, T5-Series devices may be used in VMT configuration
using a Vocollect battery.
Talkman A500/T5 VMT Mobile Computer Accessory Specifications
-30° to 50° C (-22° to 122° F)Operating Temperature
Confidential: For informational use by Vocollect Resellers and customers only
70 | Vocollect Hardware Documentation