User's Manual
-40° to 70° C (-40° to 158° F)Storage Temperature
Mounts for Talkman A500/T5 VMT Mobile Computers
The Screw On Mount is a mounting option that is bolted to a stationary surface on a vehicle.
The Clamp Mount is a mounting option that is clamped to a stationary surface on a vehicle. This can
also be bolted to a stationary surface, if desired.
Figure 47: Clamp MountFigure 46: Screw On Mount
Positioning the Talkman A500/T5 VMT Mobile Computer
• Determine the best position for the device and all the associated components. If a similar device was
previously installed, check to see if the position it used is suitable for the device.
• Test the installation for at least 30 minutes before installing on another vehicle. Record all details:
• Check that the position of the device does not obstruct vehicle controls.
• Check that the device does not obstruct the driver's view.
• Check the position of the device for user comfort over long periods.
Installing the Mounting Brackets for a Talkman A500/T5 VMT Mobile Device
The following parts are supplied by Vocollect for attaching the screw on mount:
DescriptionQuantityItem #
Vehicle Mount, Holder/Base Screw On Attachment21
Vehicle Mount, Arm12
Vehicle Mount, Holder13
The following parts are supplied by Vocollect for attaching the clamp on mount:
DescriptionQuantityItem #
Vehicle Mount, Clamp11
Vehicle Mount, Arm12
Vehicle Mount, Holder13
Confidential: For informational use by Vocollect Resellers and customers only
Talkman T5 Series | 71