User's Manual

Figure 54: A500/T5 Elastomer-SKIN Cover
• The device cover does not have to be removed before placing the device into a device charger.
• The EXO Skeleton Cover provides additional drop protection for the device, is easy to remove, and
permits full access to all device features and functions.
Figure 55: T2-Series Device Cover
• You must remove the device cover before placing the device into a device charger. Failure to do so
could result in damage to both the device and the charger.
T5/A500 Elastomer-SKIN Cover Specifications
ThermoPlastic Elastomer (Dynaflex G2755)Fabric
Putting a Cover on an A500 or T5-Series Device
1. If the device is not already off, press and hold the yellow play/pause button until the LED indicator
turns solid red and then off.
2. Disconnect any peripherals.
3. Hold the device with the battery compartment facing up and the device's buttons facing toward you.
4. Slide the open end of the cover over the connection port end of the device. Pull gently on the cover to
make sure it slides behind the tab, located on the bottom of the device, that holds the cover securely
in place.
Confidential: For informational use by Vocollect Resellers and customers only
Talkman T5 Series | 79