User's Manual

Figure 61: Properly Inserting a Battery
4. Push the back of the battery into place.
You will hear a click when the battery is in place.
Caution: Do not force the battery into the compartment. You may damage the battery or the
device. If the battery does not snap easily into place, reposition the battery in the compartment
and try again.
Make sure the battery is firmly in place and can't be removed without pressing the battery release button.
Removing a Battery from a Talkman A500, T5-Series or T2-Series Device
Make sure the Talkman device is off.
Caution: Do not remove the battery until the LED indicator is off. If you remove the battery when
the device is on or sleeping, any data collected could be lost.
1. Hold the device in one hand with the battery compartment facing toward you.
2. Press the battery release button all the way down until the top of the battery pops up from the battery
compartment.
Figure 62: Removing the Battery From a Device
3. Lift the battery out of the compartment.
Confidential: For informational use by Vocollect Resellers and customers only
Talkman T2 Series | 85