User's Manual

Belts and Belt Clips
Figure 63: Belt with Clip
Operators wear devices on a customized belt that is purchased from Vocollect. The device is attached to
the belt with a specially designed clip or holster.
The clip is attached to the Vocollect belt at the beginning of a shift. The operator can attach the device
to and remove the device from the clip as often as necessary throughout the shift. Vocollect sells three
types of mounting clips:
• T2 Series Slim Blue Belt Clip: connects a devi ceto the customized belt.
• T2 Series Heavy Duty Belt Clip: adapts an OPEN belt (sold with Vocollect's previous device) for use
with a T2 Series device.
• T5/A500 Black Belt Clip: connects a T5 or A500 device to the belt.
• To comply with government safety standards, the device must be used with either a Vocollect
customized belt and clip, a Vocollect customized shoulder harness, or a Vocollect belt holder.
• Vocollect strongly recommends that the device be worn on the right side of the body with the device’s
buttons on the top and its connectors toward your back.
Using the T-Series Belts and Clips
To mount a device onto the specially designed belt or shoulder harness, an operator must have a slim
belt clip (provided with the belt or harness). The clip should be attached to the belt at the beginning of
a shift. Then, the operator can attach the device to and remove the device from the clip as often as
necessary.
• A500 and T5-series devices can be worn on a belt or shoulder harness.
Figure 64: Attaching the Device to a Belt Clip
Confidential: For informational use by Vocollect Resellers and customers only
88 | Vocollect Hardware Documentation