User's Manual

Figure 66: T2-Series Device Cover
• You must remove the device cover before placing the device into a device charger. Failure to do so
could result in damage to both the device and the charger.
T2 Series Device Cover Specifications
Ballistic nylon, 1050-denier black
Fabric
Nylon taffeta, 80-denier black
1/8" thick high-density closed-cell foamFoam
Double polished 0.06Clear Vinyl Sleeve
T-70 nylon, size 69Thread
Used for edge binding bias tapeCordura 1000
Used to hold the cover flap downVelcro
®
Putting a Cover on a T2 Series Device
1. If the device is not already off, press and hold the yellow play/pause button until the LED indicator
turns solid red and then off.
2. Disconnect any peripherals.
Confidential: For informational use by Vocollect Resellers and customers only
90 | Vocollect Hardware Documentation