User's Manual

Caution: Do not force the battery into the compartment. You may damage the battery or the

device. If the battery does not snap easily into place, reposition the battery in the compartment

and try again.

Make sure the battery is firmly in place and can't be removed without pressing the battery release button.

Removing a Battery from a Talkman T1 Device

Make sure the Talkman device is off.

Caution: Do not remove the battery until the LED indicator is off. If you remove the battery when

the device is on or sleeping, any data collected could be lost.

1. Hold the device in one hand with the battery compartment facing toward you.

2. Push the battery release button up and pull the battery out.

Battery Warm-Up Time

If a battery has been used in a cold environment, it will not begin charging until it warms up sufficiently.

Approximate warm-up timeTemperature of battery use

6 minutes-4°C (24.8°F)

10 minutes-10°C (14.0°F)

22 minutes-20°C (-4°F)

30 minutes-30°C (-22°F)

About LED Indicators

Vocollect Talkman devices, SRX and SRX2 headsets, and their chargers have LEDs that indicate the

state of the equipment. These LEDs may be on, off or blink. In some cases an LED will blink, alternating

between two colors.

If the LEDs indicate that there is a problem, refer to information on troubleshooting to solve the problem.