User's Manual

Figure 4: Talkman T2 x
Figure 5: Talkman T1
Talkman devices are voice-directed wearable computers. The Talkman
T1 has been specifically designed for light-duty, light-industrial
environments. Operators listen to instructions to perform tasks such as
warehouse order picking and factory floor inspection, and then speak
simple phrases to enter data. Talkman T1 device is a lighter, lower-cost
alternative to the T2-series, T5-series and A500 wearable computers. It
is intended for work in areas where you don't require an extremely rugged
device.
Talkman T5-series, T2-series and A500 devices attach to a customized
belt or shoulder harness equipped with a specially designed clip. Talkman
T1 devices are inserted into a customized holster with belt clip. This
leaves the operator's hands free to inspect items, pick products, or repair
defects. A headset with an attached microphone allows the operator to
hear the device's instructions or questions. The operator talks to the
device to request information and enters data by responding to the
device's prompts.
A Talkman T5 VMT is a T5 device with a battery adapter mounted to a
warehouse vehicle, such as a forklift. After the device is mounted, the
battery adapter is placed in the battery area of the T5 device and
connected to the vehicle's power source.
• Talkman wearable computers are assembled under strict Vocollect
manufacturing guidelines. Tampering with a device in any manner
18 | OpenTopic | Talkman
®
Devices