User's Manual

will void published operating specifications and may void the product
warranty.
• Never remove the battery from a Talkman unless it has been properly
powered off.
• Vocollect designed the Talkman to be worn on the right side of the
body with the wearable computer’s buttons on the top (T5-series,
T2-series, A500) or facing front (T1) and its connectors toward the
operator’s back (T5-series, T2-series, A500) or pointed up (T1).
• The Talkman T1 must be holstered with the holster opening facing
up. Holstering with the opening facing down or to the side places the
unit at risk for dropping.
• When the Talkman is not in use, it should be placed properly into a
charger.
• A “Proper Use and Care” document has been provided with your order
which contains important handling instructions for the T1’s headset,
the SL-4. If you do not have this document, users should contact their
Vocollect Regional Sales Manager Representative or Vocollect
Reseller for additional copies of this important document.
• Use an isopropyl alcohol (isopropanol) swab or soft cloth dampened
with isopropyl alcohol to clean metal connection points. If dirt or
residue cannot be removed with the alcohol swab or cloth, use a soft,
non-abrasive rubber eraser to clean metal connection points. You
can also use a three-row toothbrush style, general cleaning brush
with natural hog hair bristles to gently brush away dirt on the contacts.
A final alcohol wipe after this should ensure a clean contact.
Important:
• These instructions are for the T2-series, T5-series and A500
devices only.
• Use only isopropyl alcohol. Do not use any other cleaning
solvent.
• If using an eraser, it must be in good condition (soft, pliable,
and not worn down to the mounting). A good test is to rub the
eraser against your skin. If it feels abrasive, do not use it,
because it will damage the connectors.
OpenTopic | Talkman
®
Devices | 19