User Manual

104
8. Say "Four."
The terminal says, "Please say the following words as they appear on the screen."
Note: If you cannot see the words displayed on the training device screen, there may
be a problem with the contrast on the device. Please refer to the manufacturer's
documentation.
9. As each word appears on the device display, say it to the Talkman terminal. The
terminal will prompt you with the same word at least four times; repeat the word
each time it asks. If it prompts you for phrases, say the phrase naturally, without
exaggerated pauses between the words.
When the Talkman terminal has asked for all words in the task the necessary
number of times, the terminal will say, "Creating voice templates. Please wait." It will
then beep periodically until all of the remaining voice templates have been created.
Note: The majority of the voice templates are actually created at the same time that
the operator is speaking the vocabulary words.
During the beeping, the terminal will periodically speak the aforementioned phrase to
alert the user that it is still busy. When the remaining voice templates have been
created, the terminal will say, "Finished creating voice templates." The terminal will
then go to sleep. The operator can begin the task by pressing the yellow play/pause
button.
Note: The operator can expect the terminal to beep for approximately two minutes
after all of the vocabulary words have been spoken. If the operator presses any of
the terminal's buttons during this time period, the terminal says, "Creating voice
templates. Please wait."
10. Disconnect the training device. (See Connecting & Disconnecting Peripherals.)
Using Headsets
To create a voice template using a headset alone, with no additional training devices,
perform the following steps:
1. Turn the terminal on by pressing the yellow play/pause button.
The LED indicator turns red for a few moments, then turns green. (If it does not,
see LED Indicators.)
The Talkman terminal says, "Please keep quiet for a few seconds."
After a pause, the terminal says, "Please say zero."
2. Say "Zero."
The terminal says, "One."
Note: Always speak in your normal tone of voice. You are training the Talkman
terminal to recognize words you say in your normal voice, so that you can speak
naturally while you work.
3. Say "One."
The terminal says, "Two."
4. Say "Two."
The terminal says, "Three."
5. Say "Three."
The terminal says, "Four."
6. Say "Four."
The terminal says, "Please say the following words..."
7. As the terminal says each word, say it back to the Talkman terminal. The terminal
will prompt you with the same word at least four times; repeat the word each time
it asks. If it prompts you for phrases, say the phrase naturally, without
exaggerated pauses between the words.
When the Talkman terminal has asked for all words in the task the necessary
number of times, the terminal will say, "Creating voice templates. Please wait." It will