User Manual

91
TTSSpeechRate
Controls the speech rate
(faster or slower) of the
terminal's voice.
1 - 9
6
TTSSpeechRateMax Sets the maximum speech rate
of the terminal's voice.
2 - 9
9 (must be greater than
TTSSpeechRateMin)
TTSSpeechRateMin Sets the minimum speech rate
of the terminal's voice.
1 - 8
1 (must be less than
TTSSpeechRateMax)
TTSVoice Controls the gender (male or
female) of the terminal's voice.
female
male
TTSVolume Controls the volume (louder or
softer) of the terminal's voice.
1 - 9
9
VT_Emulation_Task Determines whether a task
uses VT220 terminal emulation
or not.
0 = off
1 = on
Speech Recognition Parameters
Parameter Name Description Applicable Values and Default
Value
BlueStreak_Agc_DialogEnable Determines whether or not
Automatic Gain Control is
enabled during decoding.
0 = disabled
1 = enabled
BlueStreak_Decode_
RejectLengthEmbeddedLowerT
ol
The lower length tolerance, in
seconds, for words that were
trained in an embedded (i.e.
phrase) context. If using a
custom training prompt file
(.emb file), this value may
need to be increased to
prevent good recognitions from
being rejected.
Minimum value = 0
Maximum value = 4
0.250
BlueStreak_Decode_
RejectLengthMinimumLength
The minimum allowable
length, in seconds, of a word.
Words that are shorter than
this value are rejected.
Minimum value = 0
Maximum value = 4
0.130
BlueStreak_Decode_Sensitivity
This parameter defines
BlueStreak's word rejection
threshold.
BlueStreak's sensitivity is tuned
for warehouse case picking
applications. However, this
tuning may not be optimal for
all applications. Increasing the
value of this parameter will
make it more difficult for
words to be accepted;
decreasin
g
this value will allow
Minimum value = -5
Maximum value = 5
0