User Manual
Table Of Contents
- Table Of Contents
- TABLE OF CONTENTS 1
- Contact Information
- Using the Online Help System
- #
- a
- b
- c
- d
- e
- f
- g
- h
- i
- j
- k
- l
- m
- n
- o
- p
- q
- r
- s
- t
- u
- v
- w
- x
- y
- z
- Hardware
- Access Points
- Bar Code Readers
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Portable Printers
- Remote Listening Systems
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Visual Training Devices
- Wired Portable Speakers
- Learning Zone
- Solution Zone
- Other Issues
- Equipment Problems
- Other Problems
- I can't get an assignment.
- I can't get my battery on.
- I can't get my battery off.
- I can't hear anything through the headset.
- I can't log on.
- I can't unplug my headset.
- I don't know what to say next.
- My bar code reader won't scan.
- My battery keeps falling off.
- My belt doesn't fit.
- My equipment is broken.
- My headset won't stay on.
- The Talkman terminal beeps every few seconds.
- The Talkman terminal does not appear in Terminal Manager.
- The Talkman terminal does not recognize a word.
- The Talkman terminal does not hear anything I say.
- The Talkman terminal does not respond to button presses.
- The Talkman terminal heard something I did not say.
- The Talkman terminal is telling me there are errors.
- The Talkman terminal keeps shutting off.
- The Talkman terminal makes clicking noises.
- The Talkman terminal makes static noises.
- The Talkman terminal will not load a task.
- The Talkman terminal will not load an operator template.
- The Talkman Terminal will not turn on.
- Sending Equipment Back for Repairs: Return Material Authorization (RMA) Procedures
- Other Issues
- Training Zone
- Working Zone
- Adding a Terminal to the Network
- Purpose
- Procedure
- Purpose
- Procedure
- Purpose
- Procedures
- Assembling a Talkman® OPEN Battery Housing
- Caring for Headsets & Microphones
- Purpose
- Procedures
- Changing Configurable Parameters
- Purpose
- Before You Begin
- Procedure
- Purpose
- Procedure
- Conditioning a Talkman® OPEN Battery
- Configurable Parameters
- Speech Recognition Parameters
- Configuring a Terminal
- Configuring Remote Listening Systems
- Purpose
- Before You Begin
- Procedures
- Configuring Visual Training Devices
- Creating Operator Voice Templates (enrollment training)
- Erasing Spoken Responses
- Purpose
- Before You Begin
- Procedure
- Troubleshooting
- Purpose
- Before You Begin
- Procedure
- Purpose
- Before You Begin
- Procedure
- Purpose
- Before You Begin
- Procedure
- Putting a Terminal to Sleep
- Purpose
- Procedure
- Removing a Talkman® T2 Terminal from a Belt
- Purpose
- Procedure
- Repeating Prompts
- Purpose
- Before You Begin
- Procedure
- Purpose
- Procedure
- Talkman® Terminals & Terminal Chargers
- Turning Off a Talkman® Terminal
- Turning On a Talkman® Terminal
- Using a Talkman® Terminal
- Purpose
- Procedures
- Using a Terminal During Each Shift
- Troubleshooting
- Using Bar Code Readers
- Waking a Terminal Up
- Purpose
- Procedures
96
8. Connect the communicator's headset.
Note: If you are monitoring more than one operator, make sure each operator 's
transmitting communicator is set to a different channel. One receiving communicator
can listen to up to five transmitting communicators.
Connecting & Disconnecting Talkman® T2 Peripherals
Note: The information in this topic applies specifically to the Talkman® T2 system.
To view this information for the Talkman® OPEN system, click on the image of the
terminal.
• Purpose
• Before You Begin
• Procedures
Purpose
This document contains instructions for connecting and disconnecting peripheral devices that
are used with the Talkman® T2 terminal. Peripheral devices include:
• bar code readers (and other RS-232 devices)
• headsets
• portable printers
• remote listening devices
• visual training devices
• wired portable speakers
Before You Begin
Peripherals are connected to a Talkman terminal via the connector plate on the end of the
terminal. The connector plate has three ports. Peripherals are attached to the ports with
connectors. The connectors secure the peripherals to the terminal by snapping directly onto
the terminal's ports.