User's Manual

Setup Menu

Audio Setup

Audio Out: SPDIF/OFF, SPDIF/RAW, SPDIF/PCM

SPDIF/OFF: Select to disable SPDIF output.

SPDIF/RAW: Select when connecting to a 5.1 channel digital ampliﬁer (DTS/Dolby Movie.).

SPDIF/PCM: Select when connecting to a 2-channel digital ampliﬁer (Audio CD.).

Key: -6 to +6

This menu item functions the same as the Digital Key Control buttons on the front panel and remote control.

Video Setup

Brightness:

Set the brightness of the image with this setting. A lower value will make the image darker.

Contrast:

Set the contrast of the image with this setting. A higher value will make the light colors lighter and the dark colors

darker. A lower value will make the light and dark colors less vibrant.

Hue:

Set the hue or color of the image with this setting.

Saturation:

Set the Saturation of the image with this setting. Saturation makes the colors in an image more intense.

Sharpness:

Set the sharpness of the image with this setting.

Speaker Setup

Downmix: LT/RT, STEREO, VSS

LT/RT: Select when connecting to a Dolby Digital ampliﬁer.

STEREO: Select when connecting to a 2-channel stereo ampliﬁer/mixer .

VSS: Virtual surround sound. Select when using the 5.1 channel outputs on the rear panel.

Digital Setup

OP MODE: LINE OUT, RF REMOD

LINE OUT: This sets the output level to normal.

RF REMOD: This will slightly increase the output level.

Dynamic Range: FULL, 6/8, 4/8, 2/8, OFF

Use this control to adjust the dynamic range.

Dual Mono: STEREO, MONO L, MONO R, MIX MONO

Stereo: Select for standard L/R audio output.

Mono L: Select for mono audio output with the left channel on both sides.

Mono R: Select for mono audio output with the right channel on both sides.

Mix mono: Select for mono audio output to both sides.