User's Manual

10
Getting Connected
CONNECTING AN EFFECTS PROCESSOR:
An effects processor can be used with the Pre Out and Amp In jacks.
In order to use an External Effects Processor, the Power Amp In setting in the System Set Up Menu must
be set to External. Refer to System Set Up menu for details.
When Set
E X T:
When Set
INT:
External Effects Processor (not included)
Powered Speaker
The on-board microphone effects are disabled.
Microphone audio is routed out through the
Pre-Out into the external effects processor to
be altered. Once altered, it is sent back into the
DAX-9900RV through the Amp In jacks.
1. Amp In jack will function like an
Effect Loop In.
2. Pre-Out jack will funtion like an Effect
Loop Out.
3. All microphone audio will be looped
through an external effects processor
and back in through the Amp In jacks.
The Amp In jacks are disabled. The Pre-Out jacks
send an unamplified line level signal to be used with
an additional amplifier or recorder.
1. Amp In jack will be disabled.
2. Pre-Out jack will function like a standard
RCA audi output jack.
3. All microphone audio will be routed
through the internal effects processor.
Disabled
not included
Rear Panel