User's Manual

23
1. Default setting is 0/60
ii. Max – This sets the highest level the mic volume can be set to.
1. Default setting is 60/60
2. Music Setup – These options change the way the DAX-9900RV handles audio signals.
a. Input Level Adj – This alters the volume of the inputs respectively. Each input can have an adjustment of -6 to
+6 dB independently. Preset value is 0 dB
i. VOD
ii. DVD
iii. AUX
iv. TAPE
v. BGM
b. AGC Level (mVrms) – These options alter the gain of the input signals connected to each input respectively.
Each input channel can have a custom value of: 150, 300, 400, 540 mV. Preset value is 0mV.
i. VOD
ii. DVD
iii. AUX
iv. TAPE
v. BGM
c. Mic Effect Memory – This designates the default Microphone Effect when the unit is powered on. See
i. Last
ii. Effect 1
iii. Effect 2
iv. Effect 3
v. Effect 4
d. Bass – This adjusts the Bass response of the music audio. The Bass can be altered from -12dB to +12dB.
The preset value is 0dB.
e. Treble – This adjusts the Treble response of the music audio. The Treble can be altered from -12dB to +12dB.
The preset value is 0dB.
f. Balance L/R – This adjusts the proportion of music between the Left and Right audio channels. Left and Right
audio Channels. Left and Right channel can have their audio altered from -30 to 0dB. Stereo will is 0dB/0dB.
g. Sonic Enhancer - This dictates if the S.E is on/off and if on. If on, adjustments to the high and low frequency
bands can be made.
i. High-Freq: 0 - 12dB
ii. Low-Freq: 0 - 12db
3. Microphone Effect Setup – These options alter the way the Microphone effects sound and operate.
a. Echo
i. Delay Time – This alters the length of time between Echo repeats.
1. 1.0 – 30ms
ii. Repeat – This alters the number of time the Echo is heard.
1. 1.0 – 70
iii. Depth – This alters the initial strength of the Echo effect.
1. -50% -- +50%
b. Reverb
i. Time – This alters the duration of the Reverb effect.
1. 0.3 – 10 sec.
ii. Pre-Delay – This alters the delay length before the Reverb effect is heard.
1. 1.0 – 250ms
iii. Low Pass Filter (L.P.F) – This alters the tone of the Reverb effect.
1. 1.4Hz – 13KHz
iv. Type – This changes the which Reverb is used.
1. Stage, Plate, Hall, Room
c. Initial Data – This reverts all of the options back to factory settings.
Setup Menu