User's Manual

8
Getting Connected
CONNECTING:
Subwoofer - A Self-powered subwoofer can be used when it is connected to the Sub Out jack. Use the controls
labeled SUB on the back panel to alter the audible characteristics of the Bass:
- The crossover frequency knob will dictate how “low” the bass will sound. The closer it is to 50Hz, the
bass will be “rumbly’ and will be felt more than it will be heard. When set closer to 150Hz, the bass has
more of a“punchy” sound to it.
- The Phase switch will correct the audio of the sub to better match the speakers. If the speakers and
sub were out of Phase, the audio will sound muted compared to when the are in Phase.
-The Balance knob will change the ratio of Music of Mic signals being routed to the Sub.
- The Level will determine the volume of the connected subwoofer.
Rear Panel