Owner's Manual

Descriptions and Functions

TRANSMITTER:

(Front Panel)

1. Power/Select: Press and hold to power unit on/off. Press once to set ﬁnal frequency

channel selection

2. Volume Knob: Adjusts the overall output volume of the audio being transmitted

3. LED Displays: conveniently show frequency channel selection

4. Left/ Right Channel buttons: use these to re-sync transmitter and receiver onto a different

frequency channel

5. Power LED: Red - Charging

Green - Full Charge

Blinking - Battery Low

(Back Panel)

1. Antenna: assists with increasing the transmission range (operating distance between

transmitter and receiver)

2. XLR/ 1/4” Combo Jack Inputs: connect a balanced or unbalanced audio source here

3. Battery compartment

4. USB port: connect micro USB cable here to recharge internal battery